1. This card is a highly integrated, high reliability general 4-axis motion control card；
2. It can control 1~4 axes stepper or servo motor, and linear interpolation of any 2~4 axes；
3. Hot-plug and automatic addressing; trapezoidal or S-shaped speed curve optional；

4. With immediate stop and deceleration stop function; multi-axis can start and stop at the same time; can change speed in motion.

1. Each card can drive four axes, the maximum pulse output frequency is 2.4MHz;
2. With trapezoidal and S-shaped acceleration curves, the acceleration can be set separately;
3. Pulse signal: differential signal, common anode signal optional; pulse + direction mode, double pulse mode optional;
4. Each axis has independent: positive and negative limit points, positive and negative deceleration points and home signal input ports;
5. 32 input (IN), 28 outputs (OUT, maximum drive current 200mA), full photoelectric isolation;
6. Support Windows2000/XP/7 and other operating systems;
7. Support VB, VC, LABVIEW, C# and other development environments;
8. Working temperature: 0～55 °C, storage temperature: -20～70 °C, humidity: 5%～90%, no dew;
9. Terminal board size: 127mm X 90mm, expansion board size: 120mm X 105.7mm