1. This card is a highly integrated, high reliability universal four-axis motion control card；
2. It can control 1~4 axes stepper or servo motor, and linear interpolation of any 2~4;
3. With multi-card co-working, one PC can use up to 16 motion control cards at the same time to control 64 axis；
4. Hot plug and automatic addressing; select trapezoidal or S-shaped speed curve；

2. With trapezoidal and S-shaped acceleration curves, the acceleration can be set separately;

3. Pulse signal: differential signal, common anode signal optional; pulse + direction mode, double pulse mode optional;

4. Each axis has independent: positive and negative limit points, positive and negative deceleration points and home signal input ports;

5. 32 input (IN), 27 outputs (OUT, maximum drive current 200mA), full photoelectric isolation;

6. Support Windows2000/XP/7 and other operating systems;

7. Support VB, VC, LABVIEW, C# and other development environments;

8. Working temperature: 0～55 °C, storage temperature: -20～70 °C, humidity: 5%～90%, no dew;

9. Terminal board size: 127mm X 90mm, expansion board size: 120mm X 105.7mm