l High performance, big high speed output torque with excellent stability and low cost
l 12/8 constant-torque microstep settings, 200 microsteps the highest
l Unique six-wire control circuit, effectively increase high speed torque (double torque compared with four-wire drive)
l 200Kpps response frequency
l After step pulse stops for 100ms, output current automatically halve to reduce motor heat
l Bipolar constant current wave chopping mode, improve motor speed and power
l Photoelectric isolated signal input/output
l Drive current adjustable from 0.1A/phase to 4A/phase
l Sole power input, voltage range: DC15~40V
l Fault protection: over current, overheat, low voltage protection
l Small size: 136*92*25mm, 0.3kg
YKA2404MA/B is identical-angle
constant-torque microstep drive with working voltage DC15~40V. It’s designed
for various models of two phase 6/8 wire 42~86mm (NEMA 17~34) hybrid stepper
motors which current are below 4A.
With the uses of the first advanced
six-wire technology, the motor will proceed Automatic Gain Control at high
speed and reducing reverse EMF, thus greatly improve the torque output (double
torque compared with four-wire drive) in high speed.
In applications which running speeds are
not high, with the use of 200 microsteps, stepper motor will be operated under
high accuracy, and low vibration/noise.
